Once a specific PCB is programmed, the machine automatically picks up each component from its designated feeder or tray, centers the part via laser Cyberoptics® or centering fingers, moves to the placement location via closed loop servo system, and accurately places the part. The feeders automatically position the next component for pick-up.
The touchless Cyberoptics® centering option enables fast and accurate placement of the complete range of components.
A wide range of components can be placed including 0201s, 0402s, 0603s, 0805s, 1206s, melfs, SO-28 to SO-8s, SOTs, SOICs, (fine pitch) QFPs, BGAs, large PLCCs, sockets and many others.
Computer controlled in 10 millisecond increments with separate interval/raise-lower speed allows solder paste or adhesive glue to be applied accurately prior to component placement. This time/pressure fluid dispenser has dispense rates up to 10,000 dots per hour.
The teach-in camera magnifies the positions onto a dual use color monitor. Its built-in vision software provides fiducial correction of misregistered boards.
|Max Board Size||13.5" x 22" (343mm x 560mm)|
|Smallest Component Capability||0201 components|
|Largest Component Size||1.378" (35mm) square body|
|Placement Accuracy||± 0.001" (0.025mm)|
|Max Placement Rate||4800 cph|
|Typical Verifiable Placement Rate||2500-3600 cph|
|Fine Pitch Capability||To 15 mil pitch (0.381mm)|
|Max Travel Area||22" (X axis) x 22" (Y axis) (560mm x 560mm)|
|Overall Dimensions||40" x 42" x 53"h (1016mm x 1067mm x 1346.2mm)|
|Max No Of Feeders 8mm Tape||64|
|Max No Of Feeders With L Gb 12 Bank Feeders||96|
|Tape Feeders||8, 12, 16, 24, 32, 44 mm (Electrical)|
|Vibratory Feeders||Loose, tube, stick (frequency & amplitude control)|
|Matrix Tray Feeders||With Board/Matrix tray holders|
|Laser Centering||Touchless Cyberoptics® laser (OPTION ONLY)|
|Vision System||Color CCD card camera|
|Dispenser Option||Up to 10,000 dots/hr.|