The Cognex® vision assist allows
accurate placement of 0201s,
ultra micro BGAs, CSPs, QFPs
and a wide range of virtually all
The BGA being centered at the
left appears on the software
window shown at the right. The
LV-series vision centering pick
and place systems use the full
features of Cognex® vision.
Standard tape feeder sizes
include 8mm, 12mm, 16mm,
24 mm, 32mm and 44mm.
The vibratory feeder with frequency
and amplitude control can handle
loose and tube components.
Unique SuperStripTM feeders are
a convenient way to use short
Feeder positions are pre-programmed for quick set-up.
With the optional 12 position 8mm
bank feeders, capacity can
increase by 50%, i.e. the model
LS60V would increase to a
capacity of 144 8mm tape feeders.
Computer controlled in 10 millisecond
increments with separate
interval/raise-lower speed allows
solder paste or adhesive glue to
be applied accurately prior to
component placement. This time/
pressure fluid dispenser has dispense
rates up to 10,000 dots