|
Prototype Stencil Printer
The Prototype Stencil Printer is a low cost SMT stencil printer specially designed to work with Prototype SMT Stencils and Prototype SMT Foils. It has a quick and easy registration method.
|
| |
| Lead Time: |
In stock and ready for shipment |
Price: |
$295.00 |
|
|
| |
|
|
T4030 Manual SMT Stencil Printer
SMT Stencil Printers are a common equipment in SMT industry.
- Place and fix PCB at the bottom of moulding board.
- Place the solder paste inside the template scraper is it then moved by the drive device, the solder paste is printed on the PCB through the bore of the template.
- Raise the template, take out the PCB board, and finish printing the pad on it.
|
| |
| Lead Time: |
1 week |
Price: |
$926.48 |
|
|
| |
|
|
SD 240 SMT Stencil Printer
Manual operated stencil printer
Stencils do not need mounting holes.
Fixing a stencil is fast and easy, no heating of the stencil is required.
Positioning of the printed circuit boards is simple with the use of magnetic placeholders. |
| |
| Lead Time: |
4 weeks |
Price: |
$1,132.00 |
|
|
| |
|
|
Gold-Print™ SPR-10 Manual SMT Stencil Printer
The Gold-Print™ SPR-10 is a cost effective manual SMT stencil printer with a quick and easy registration method. The operator simply holds the frame on opposite edges, manually aligns the stencil openings to the board land patterns, locks the frame, and applies solder paste.
|
| |
| Lead Time: |
4-6 weeks |
Price: |
$1,200.00 |
|
|
| |
|
|
SD 300 SMT Stencil Printer
Techno SD 300 Manual operated stencil printer
Stencils do not need mounting holes.
Fixing a stencil is fast and easy, no heating of the stencil is required.
Positioning of printed circuit boards is simple with the use of magnetic placeholders.
|
| |
| Lead Time: |
4 weeks |
Price: |
$1,627.00 |
|
|
| |
|
|
|
| |
| Lead Time: |
1 week |
Price: |
$2,118.60 |
|
|
| |
|
|
Gold-Print™ SPR-20 Manual SMT Stencil Printer
The Gold-Print™ SPR-20 benchtop, manual SMT stencil printer is designed for low to medium volume assembly runs. Precise X,Y, Z, and theta axis controls allow for accurate, consistent deposition of solder paste or masking material for SMT.
|
| |
| Lead Time: |
4-6 weeks |
Price: |
$2,200.00 |
|
|
| |
|
|
SP-200 - Stencil Printer
For high accuracy and a higher level of working comfort DIMA designed the stencil printers SP-200. The stencil allows smaller openings than a screen and is therefore better suited towards fine pitch printing. The stencil printer is a heavy duty manually operated units based on a heavy aluminium frame with bearings to ensure exact printing results. |
| |
| Lead Time: |
4 - 6 weeks |
Price: |
$2,214.00 |
|
|
| |
|
|
SD 360U SMT Stencil Printer
This manual stencil printer equipped with a printed circuit board table holding is a unique up and down lift system to position the stencil over the PCB.
Stencils do not need mounting holes.
Fixing a stencil is fast and easy, no heating of the stencil is required.
|
| |
| Lead Time: |
4 weeks |
Price: |
$2,350.00 |
|
|
| |
|
|
SD 360 SMT Stencil Printer
The SD 360 manual stencil printer comes with a horizontal sliding table system to position the printed circuit board under the stencil.
Stencils do not need mounting holes.
Fixing a stencil is fast and easy, no heating of the stencil is required.
Positioning of PCB’s is simple with the use of magnetic placeholders.
|
| |
| Lead Time: |
4 weeks |
Price: |
$2,879.00 |
|
|
| |
|
|
|
| |
| Lead Time: |
1 week |
Price: |
$3,177.00 |
|
|
| |
|
|
Gold-Print™ SPR-25 Manual SMT Stencil Printer
The Gold-Print™ SPR-25 benchtop, manual SMT stencil printer is designed for low to medium volume surface mount assembly runs. Fine X,Y, Z, and theta adjustments for exact stencil-to-board alignment result in precise, fine pitch printing of solder paste.
|
| |
| Lead Time: |
4-6 weeks |
Price: |
$4,300.00 |
|
|
| |
|
|
|
| |
| Lead Time: |
1 week |
Price: |
$4,500.00 |
|
|
| |
|
|
ZelPrint LT300 Manual SMT Stencil Printer
The ZelPrint LT300 is a precision manual SMT stencil printer. This tabletop model can be used for both prototypes and small scale production of fine-pitch SMT boards. This stencil printer is shipped with a ZelFlex quick-release stretching frame for stencils, but it is also compatible with various other frames. |
| |
| Lead Time: |
2 weeks |
Price: |
$5,395.00 |
|
|
| |
|
|
T1200 Semiautomatic SMT Stencil Printer
The T1200 is a semiautomatic SMT Stencil Printer. Featiring:
- PLC controlling system makes repeated printing accuracy higher.
- The screen can make the usage and maintenance very easy.
- The control valve on every gas pot can be adjusted to the speed of the pot's movement.
|
| |
| Lead Time: |
2 weeks |
Price: |
$5,558.83 |
|
|
| |
|
|
SP-500 - Stencil Printer
DIMA offers a series designed manually operated printers designed for stencil or screen printing solder paste, glue and other products onto printed circuit boards and other substrates. The combination of the special pressure spreading mechanism with linear guidance greatly improves the accuracy of printing. |
| |
| Lead Time: |
4 - 6 weeks |
Price: |
$6,187.00 |
|
|
| |
|
|
Gold-Print™ SPR-40 Semiautomatic SMT Stencil Printer
The Gold-Print™ SPR-40 is a semiautomatic SMT stencil printer designed for medium volume surface mount assembly. The dual squeegee with individual pressure control makes solder paste deposition accurate and repeatable.
|
| |
| Lead Time: |
4-6 weeks |
Price: |
$6,300.00 |
|
|
| |
|
|
T1200D Semiautomatic SMT Stencil Printer
The T1200 is the first SMT Stencil Printer with a digital Display-Module for the pressure inland. With the help of the creative "Digital Display Scraper Pressure Adjustment" design, the pressure of the scraper can be easily adjusted to make the printing control visible. |
| |
| Lead Time: |
2 weeks |
Price: |
$6,616.80 |
|
|
| |
|
|
SP-400 Semi Printer
- The squeegee head moving in X/Y direction under the guidance of the linear rail, so to make sure it's moving smooth and stable
|
|
| |
| Lead Time: |
2 - 4 weeks |
Price: |
$7,800.00 |
|
|
| |
|
|
Gold-Print™ SPR-45 Automatic SMT Stencil Printer
The Gold-Print™ SPR-45 has the same features as the SPR-40, but is more automated with its power sweep squeegee and power frame lift for higher volume runs. Even for fine pitch applications, friendly precision controls make operation of these systems simple and easy.
|
| |
| Lead Time: |
4-6 weeks |
Price: |
$8,500.00 |
|
|
| |
|
|
HS-100 - Hybrid Semi-Automatic Stencil Printer
DIMA’s semi-automatic screen printer is belonging to the Hybrid family of production equipment. This extremely robust and accurate printer delivers a perfect quality for an affordable price. |
| |
| Lead Time: |
4 - 6 weeks |
Price: |
$30,025.00 |
|
|
| |
|
