RO-413 Full Convection Reflow Ovens offer full forced hot air heating to maintain consistent edge-to-edge temperatures, regardless of printed circuit board component size or density,an ideal profile, preheat temperatures are maintained long enough to permit activation of fluxes, while exposure of the components to higher reflow temperatures is kept to a minimum. 8 independently-controlled heating zones, with bottom side heating also adjustable to prevent overheating of inverted components on double-sided boards.
LCD display permits continuous monitoring of the production run, with real time profiling shown in convenient graph format and circuit board temperatures through each zone. To eliminate the possibility of damage caused by static charges, the Breeze includes an air ioniser in the cool down zone as standard equipment. Full Convection Reflow Oven available as a bench top or as stand with locking cabinets to make it a console model. LEAD FREE APPOVED!

The Breeze reflow oven offers full forced hot air heating to maintain consistent edge-to-edge temperatures, regardless of component size or density. Infinite profiling possibilities are achieved in this reflow oven through 8 independently-controlled heating zones, with bottom side heating also adjustable to prevent overheating of inverted components on double-sided boards. A dedicated LCD display permits continuous monitoring of the production run, with real time profiling shown in convenient graph format and board temperatures through each zone shown in real time.

To eliminate the possibility of damage caused by static charges, the Breeze includes an air ioniser in the cool down zone as standard equipment.

The boards are transported through the oven on an edge conveyor with 5 mm pins (3mm optional) with an adjustable speed from 50mm - 800mm per min.

Microprocessor controller with RS-232 interface for heating and cooling zones. Speed and temperature profiling controlled via LCD display or by optional PC.

Full convection circulated hot air from the top and support plates at the underside. 8 heating zones, 1 cool down zone.

Axial ventilator with integrated ionising unit blowing from bottom side.