 |
|
TB780D Automatic solder
Part #: TB780D
Lead Time: 2 weeks
|
|
 |
 |
| Solder type |
Lead / common solder |
| Max PCB size |
50—200mm |
| Components height |
Between 0.31" and 5.11" or 8mm and 130mm |
| Capacity |
286.60Lb or 100Kg |
| Preheating length |
23.62" or 600mm |
| Temperature accuracy |
±2 |
| Spray way |
Foam |
| Temperature range |
Room - 300C |
| Wave height |
0 - 0.31" or 0 - 8mm, keep balance wave crest |
| Heating controlling |
PID |
| Speed |
0—1800mm/min |
| Start power/normal power |
12KW/6KW |
| Preheating temperature |
Room — 260C |
| Width adjust |
Manual adjusting |
| Transmit angle |
3 - 8 Degrees |
| Direction |
Both Right and Left |
| Controlling accuracy |
Taiwan motor |
| Weight |
1433.00Lb or 650Kg |
| Dimension |
55.11" x 39.37" x 59.05" or 1400mm x 1000mm x 1500mm, it is 82.67" or 2100mm when the machine include loading and cooling system |
|
|
Features and Functions:
Flux Spray System
- Nozzle: Imported nozzle, better spray
- Air system: AIRTAC electromagnetism valve, anti-corrosive pipe
- Moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
- Filtration flux system: The filtering device is made of multi-collecting lay, it is easy to clean.
- Flux controlling: Anti-corrosive flux control and display.
Welding system
- Material: 316 stainless steel
- Capacity: 100kg double wave crest capacity
- Height range of wave crest: 0—8mm adjustment and wave crest balanced.
- Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
- Unique nozzle: Double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
- Heat controlling system: PID control, accuracy is ±2
- Moving tin pot: In and out can be finished by hand.
- Motor of wave crest: imported stable motor.
- Tin pipe: screw thread stem imported motor
Cooling system
- Cooling motor: Unique cooling design.
Transmission system
- Chain: Stainless steel chain, anti-corrosive, ametabolic.
- Rail system: Strong special aluminum.
- Speed: 0—1800mm/min.
- Accuracy: Motor made in Taiwan, it is easy to adjust and maintain.
Controlling system
- Buttons on the panel: Manual/ automatic control, speed can be set, temperature can be displayed.
- Protection short circuit: With short circuit protection, and Sanling air switch protection in main power, tin pot of preheating zone, with fuse power in controlling system.
- Urgent stop protection: There are 2 urgent stop protection systems in the soldering machine, to cut off power in urgent condition.
- Whole machine controlling: Relay controlling.
- Transmission speed: Taiwan motor makes sure the speed is stable.
- Wave crest: Taida transducer makes wave crest flatter.
- Over-current protection: Over-current protection with transducer, will cut off power when the current is over to keep the motor safe.
- Modularization wiring device:There are a main wiring modularization and a controlling modularization.
|
|
|
|
