GC-40 Motorized Component Counter, reliable and easy-to-use systems with presettable count for any Axial, Radial or SMD device. Made to last, reliable, easy to use systems for any type of taped device - Axial, Radial or SMD. The ideal solution to all your counting needs.
  • Motorized deluxe reel stand
  • Presettable count with audible beep
  • AC or battery operation
  • Five (5) digit LCD display
  • Forward / Reverse function makes counting foolproof
  • Counts taped SMD, Axial and Radial components on one machine
  • Divide-by feature permits exact count of virtually all types and sizes of components
  • Non-contact photoelectric infrared smart sensor
Money orange $3,495.00
The GC-12 component counter is a reliable and easy-to-use system for any Axial, Radial or SMD device. These counters are rugged, reliable, easy to use systems for any type of taped device - Axial, Radial or SMD, the ideal solution to all your counting needs.
  • Four (4) digit LCD display
  • Forward / Reverse function makes counting foolproof
  • Counts taped SMD, Axial and Radial components on one unit
  • Non-contact photoelectric infrared smart sensor
  • Counts up to 100 components per second
Money orange $2,995.00 $2,200.00
This lead forming machine will trim a wide range of components. It not only routinely accepts various types of caps - TO-92s, LEDs, SIPs etc. - but in the machine's manual mode will easily form and trim leads on components that are too top heavy for other vibratory processors. The reason for the RTVs versatility is an exclusive vibratory mechanism which operates in a horizontal plane. This provides far greater stability so parts can be more consistently processed.
  • Linear vibratory feed track
  • Fully adjustable cut length with built-in scale
  • Processing speeds up to 3,000 cph
  • Automatically separates finished components from scrap
Money orange $2,495.00
The GC-30 is a deluxe component counter, reliable and easy-to-use systems with presettable count for any Axial, Radial or SMD device. These counters are rugged, reliable, easy to use systems for any type of taped device - Axial, Radial or SMD. The ideal solution to all your counting needs.
Money orange $2,295.00
The R-1 Radial lead trimmer to accomplish low to medium volume operations for Cuts taped radial components. Easily adjustable cut lengths in less than one minute. Upgradable with motor drive & counter (DAC), and reel holder (RH-1).
Money orange $1,195.00
The F-1 Axial Component Trimmer/Former, Cuts & bends each side of an axial components to 90° for horizontal mount (flush mount) configuration.
Clock fast Lead Time: 3 weeks Money orange $1,195.00
×